Insucoat RB

Rubberized Flexibility: The SBR rubber content allows the membrane to bridge minor hairline cracks and withstand thermal movements.

Damp-Surface Compatible: Can be safely applied to damp concrete surfaces, reducing downtime on-site.

Curing & Protection: Acts as a dual-purpose curing compound for freshly cast concrete while providing instant waterproofing.

Exceptional Adhesion: Forms a powerful bond with concrete, masonry, wood, and metal substrates.

Chemical Shield: Highly resistant to chlorides, sulphates, and organic acids prevalent in groundwater.

Non-Toxic & Safe: Solvent-free, non-flammable, and safe for use in confined or poorly ventilated areas.

Substructure Waterproofing: Protecting foundations, footings, and retaining walls below ground level.

Wet Area Protection: Ideal waterproofing for bathrooms, kitchens, and laundry areas before tiling.

Surface Priming: Used as a high-adhesion primer for torch-applied bituminous membranes.

Roofing Systems: Maintenance of existing roofs and as a protective coating for concrete slabs.

Facade Damp-proofing: Applied behind cladding or stone works to prevent moisture migration.

Surface Preparation: Clean the substrate thoroughly to remove all dust, oils, grease, and any loose concrete debris or laitance.

Priming: A primer coat can be prepared by diluting the product with 15-20% clean water to ensure maximum penetration and adhesion.

Application: The material can be applied using a brush, roller, or airless spray machine. It is recommended to apply two or three coats, depending on the required level of protection.

Time Intervals: A waiting period of 3-4 hours (depending on the ambient temperature) is required between successive coats to allow for proper drying.