Addibond 05

Superior Interlayer Bonding: Forms a high-tenacity adhesive film preventing delamination of renders, plasters, and concrete toppings.

Waterproofing & Damp Control: Converts standard cement mortars into dense, water-tight protective barriers.

Flexural & Tensile Strength Booster: Improves overall mechanical toughness, preventing brittle failure under dynamic loads.

Key Coat & Spatter Dash Enhancement: Improves mechanical keying for cement spatter coats (key-coats) on smooth concrete.

Corrosion Protection: Non-toxic, chloride-free chemical structure safe for embedded structural reinforcement for 2026 projects.

Slurry bonding slurry (wet-on-wet application) for connecting old concrete structures to fresh pours.

Spatter-dash (Key-coat / Tartasha) bonding admixture for smooth concrete walls and ceilings across Egypt.

Polymer-modified repair mortars (PMR) for structural patching and concrete spall restoration.

High-performance tile adhesives, waterproof screeds, and coved fillet joint mortars using easydeal.

Abrasion-resistant floor toppings for warehouses, industrial plants, and parking ramps.

Surface Preparation: Substrates must be sound, structurally clean, and free from oil, grease, or loose debris. Pre-wet substrate to Saturated Surface Dry (SSD) condition.

Bonding Slurry Mix (Bonding Coat): Mix 1 part Addibond 05 with 1 part clean water, then blend with 2 to 3 parts fresh Portland cement to achieve a brushable slurry consistency.

Application Method (easydeal method): Brush slurry thoroughly onto prepared SSD surface. Place concrete or render immediately while slurry is wet (Wet-on-Wet).

Mortar Modification: Add 10% to 20% by weight of cement into gauging water to enhance repair mortar plasticity and strength.