Pure Tone 41
Pure Tone 41
Pure Tone 41 is an ultra premium, high-performance polymer modified acrylic interior water based flat paint engineered specifically for top tier finishing, decoration, and protection of internal walls and ceiling structures.
Technical Property | Value / Description | Engineering Benefit |
Classification | High-Quality Copolymer Acrylic Interior Emulsion Flat Paint | Premium interior finish and highly washable mask for walls/ceilings |
Chemical Base | Acrylic Copolymers, Titanium Dioxide, and Fine Mineral Fillers | Establishes a highly cohesive film that entirely prevents flaking or peeling |
Appearance / Finish | Ultra-White Smooth Matt Finish (Computerized tintable system) | Effectively camouflages putty irregularities with zero glare reflection |
Washability Power | Exceptional Rating (Highly resistant to scrub and daily washing) | Permits effortless maintenance and stain removal without fading |
Drying & Safety Profile | Fast-Drying, Eco-Friendly, Low VOC and low solvent odor | Accelerates structural execution cycles for rapid facility handover |
puretone
Exceptional Hiding & Opacity Profile: Loaded with high-purity minerals that mask the underlying dark mortar or putty shades efficiently from the first uniform pass.
Superior Washability & Scrub Resistance: Features a robust polymer matrix that withstands repeated wet washing with mild detergents without losing film thickness.
Flawless Plaster Defect Camouflage: Its dead-matt composition eliminates specular light reflection, hiding minor trowel marks or sand irregularities on putties.
Extended Color & Whiteness Retention: High immunity against yellowing caused by atmospheric conditions or indoor lighting, keeping a fresh look over time.
Balanced Rheology & Anti-Sagging: Specifically engineered with optimized viscosity parameters to prevent dripping or sagging during overhead roller application on high ceilings.
Exceptional Hiding & Opacity Profile: Loaded with high-purity minerals that mask the underlying dark mortar or putty shades efficiently from the first uniform pass.
Superior Washability & Scrub Resistance: Features a robust polymer matrix that withstands repeated wet washing with mild detergents without losing film thickness.
Flawless Plaster Defect Camouflage: Its dead-matt composition eliminates specular light reflection, hiding minor trowel marks or sand irregularities on putties.
Extended Color & Whiteness Retention: High immunity against yellowing caused by atmospheric conditions or indoor lighting, keeping a fresh look over time.
Balanced Rheology & Anti-Sagging: Specifically engineered with optimized viscosity parameters to prevent dripping or sagging during overhead roller application on high ceilings.
Substrate Profiling: Target internal concrete frameworks, brick blockwork, or dry wall boards must be structurally sound, flat, fully dry, and meticulously cleared of loose sanding dust, plaster grease, or contaminants. Apply a high-penetration sealer before paint installation.
Mixing Protocol: Dilute Pure Tone 41 compound with clean, potable water according to specific technical datasheet configurations (typically 10% to 15% for the base layer). Stir slowly and thoroughly with a mechanical drill-mixer until completely uniform.
Execution Pass: Install utilizing a fine-nap interior roller, broad block-brush, or professional airless spraying systems in two uniform, cross-directional passes.
Layer Sequences: Maintain an adequate drying window of 3 to 5 hours between subsequent coats depending on active internal room temperature and humidity levels.
