Coat Strip

Aggressive Chemical Penetration: Pierces through dense stacked layers of historic paint coatings, shearing them clean away from the root substrate interface.

High-Viscosity Non-Sag Architecture: Clings firmly to complex industrial metal latticework, pipes, and overhead spans to maximize core chemical reaction windows.

Instantaneous Swelling Reaction: Initiates immediate structural degradation within minutes, turning solid old paint into a wrinkled, soft, easily scrapeable mass.

Preservation of Fine Details: Eradicates coatings cleanly without scarring delicate architectural wood moldings, luxury furniture, or industrial sheet metals.

Suppressed Volatility Formulation: Evaporates at a significantly slower pace compared to liquid strippers, maximizing active product capacity in open 2026 site operations.

Stripping obsolete industrial coatings from automotive bodies, railway stock, marine vessels, and structural steel components inside production yards for 2026 metrics.

Removing ancient varnishes, shellacs, and lacquers from commercial wood doors, windows, and heritage restoration artifacts.

Clearing cured epoxy deposits, heavy traffic marks, and failing sealers off concrete floors and structural masonry walls during building maintenance.

Material specification tracing and bulk delivery management within marine asset maintenance, military refurbishment contracts, and civil restoration BOQ schedules.

Safety Protocols: Deploy appropriate chemical-resistant gloves, safety goggles, and respiratory safeguards. Execute strictly within well-ventilated operational spaces.

Application Methodology: Apply Coat Strip gel generously and thickly over the targeted profile using a heavy natural bristle brush. Do not brush out excessively to preserve a thick chemical blanket layer.

Dwelling & Stripping: Allow the compound to react for 5 to 20 minutes (subject to paint type and thickness) until complete film blistering occurs. Scrape the wrinkled residue smoothly utilizing a putty knife or industrial wire brush.

Post-Stripping Wash: Thoroughly cleanse the stripped face using fresh water or cleaning thinners to neutralize chemical trace layers prior to executing new coating coats.