Insucoat WB
Insucoat WB
Insucoat WB is a dark brown, liquid-applied bitumen emulsion that dries to form a seamless, highly flexible black membrane.
Property | Description / Value |
Base Material | High-Quality Water-Based Bitumen |
Type | Cold-Applied / Eco-Friendly |
Color | Dark Brown (Dries to solid Black) |
Density | 1.03 ± 0.02 g/cm³ |
Solid Content | 35% ± 3 (Standard) |
Drying Time (Touch) | 1 - 2 Hours @ 25°C |
Full Curing Time | 24 Hours |
Heat Resistance | No flowing or sliding up to 100°C |
Eco-Friendly (Water-Based): Non-toxic, non-flammable, and solvent-free. Safe for use in enclosed areas and underground structures.
Damp-Surface Tolerant: Can be applied on slightly damp concrete, saving valuable time during construction schedules.
Dual-Action Curing: Functions as a curing compound for newly cast concrete, preventing rapid water evaporation.
Chemical Protection: High resistance to soil salts, chlorides, and sulphates commonly found in groundwater.
Ease of Use: Cold-applied via brush, roller, or spray; no heating required (Cold Bitumen).
High Adhesion: Exceptional bonding strength to concrete, masonry, wood, and metal surfaces.
Foundation Waterproofing: Protecting footings, grade beams, and neck columns from soil moisture.
Adhesion Primer: Used as a prime coat for torch-applied bitumen membranes to seal pores and enhance bonding.
Wet Areas: Damp-proofing kitchens, bathrooms, and laundry rooms prior to plumbing installation.
Roofs & Terraces: Protective coating for flat concrete slabs and balconies to prevent seepage.
Crack Management: Filling hairline cracks in various substrates to prevent water ingress.
Surface Preparation: The substrate must be clean, sound, and free from oil, grease, dust, or loose concrete debris.
Priming: For high penetration, dilute the product with 15-20% clean water to create a primer coat.
Coating: Stir well and apply two or three coats, depending on the required protection level. (Add 5-10% water if needed for easier application).
Drying Intervals: Allow each coat to dry completely (approx. 3-4 hours) before applying the subsequent layer.
