Roof Insulation
Roof Insulation
Insutech Roof Insulation This system is engineered to act as a resilient shield against rainwater and moisture ingress while simultaneously providing a thermal barrier that prevents solar heat transfer into the concrete structure.
Insutech products supplied via Specialist STC Company meet rigorous standard specifications to ensure peak performance:
Bituminous Membranes: Rolls with thicknesses ranging from 3mm to 5mm, reinforced with high-quality polyester to ensure superior puncture and tear resistance.
Thermal Insulation Boards (EPS/XPS): Available in various densities from 16 kg/m³ to 35 kg/m³, featuring an exceptionally low thermal conductivity coefficient (K-value).
Chemical Resistance: Inert materials that do not react with soil chemicals or acidic rainwater.
Temperature Tolerance: High stability under extreme temperature fluctuations (ranging from -20°C to +120°C).
Dual-Efficiency: Provides both waterproofing and thermal insulation in a single integrated system (Combo System).
Energy Savings: Reduces electricity consumption for cooling and heating systems by up to 40%.
Structural Protection: Prevents concrete cracking caused by freeze-thaw cycles or excessive thermal expansion.
Ease & Speed of Installation: Materials are designed for rapid deployment in large-scale construction projects.
Sustainability: Eco-friendly, recyclable materials that contribute to Green Building certifications (LEED) in 2026.
To ensure the highest quality of execution via easydeal and Specialist STC Company, the following steps are recommended:
Surface Preparation: Clean the substrate thoroughly and create a "fillet" (cant strip) at the wall-to-floor intersections.
Sloping Screed: Verify the correct slope toward drainage points to prevent water pooling.
Priming: Apply a cold bitumen primer to the surface to ensure maximum adhesion of the membranes.
Membrane Installation: Torch-apply the bituminous rolls with a minimum overlap of 10 cm between sheets.
Board Placement: Lay the thermal insulation boards (EPS/XPS) tightly to prevent "thermal bridges."
Flood Testing: Conduct a 48-hour water flood test to verify zero leakage before applying the final protective layer.
Insutech systems supplied by Specialist STC Company are utilized in a wide range of projects:
Flat and Sloped Concrete Roofs: For residential, commercial, and administrative buildings.
Metal Roofing (Sandwich Panels): For industrial factories and large-scale warehouses.
Inverted Roofs: Where thermal insulation is placed above the waterproofing to protect the membranes from UV radiation.
Landscaped Roofs (Roof Gardens): Serving as the essential base layer for green spaces atop modern buildings.
Building Retrofitting: Upgrading the insulation efficiency of existing older structures.
