Kemapoxy 131 ENS-3C
Kemapoxy 131 ENS-3C
Kemapoxy 131 ENS-3C is a premier, solvent-free, three component (3K) heavy-duty structural epoxy mortar and floor screed system.
Technical Property | Official Certified Value | Engineering Benefit |
Classification | Three-Component (3K) Solvent-Free Structural Epoxy Mortar | Delivers armored mechanical protection and robust structural repair |
Component Synthesis | Liquid Epoxy Resin & Hardener + Graded Quartz Crystalline Aggregate | Reaches high structural load bearings surpassing standard concrete matrixes |
Mechanical Resistance | Exceptional Defiance Against Scouring, Wear, & Severe Impact | Ideal for industrial production flooring subjected to heavy transport tracking |
Interfacial Bond Modulus | Deep Direct Mechanical Fusion to Prepared Concrete Surfaces | Mitigates floor delamination or peeling under dynamic operational weights |
Chemical Immunity | Outstanding Impermeability to Solvents, Acids, Oils, & Fuels | Shields facility concrete platforms, maintenance bays, and power terminals |
kemapoxy 131 e(ns) 3c
Ultimate Compressive Strengths: Tolerates extreme physical loading and crushing stresses, functioning as a reliable system for degraded concrete structural parts.
Steel-Hard Abrasion Resistance: Strongly opposes ongoing structural wear and mechanical abrasion caused by heavy industrial vehicles for 2026 performance layouts.
100% Solids Solvent-Free Formulation: Ensures clean indoor environment handling with near-zero shrink ratios, matching strict industrial hygiene guidelines.
Flexible Build Application: Accommodates variable thickness executions to fill deep concrete divots, level rough pads, and craft accurate facility slopes.
Hermetic Zero-Porosity Defense: Shields inner concrete foundations by preventing the ingress of chemical spills, water tracking, and industrial salts.
Repairing, smoothing, and strengthening damaged structural concrete slabs, heavy honeycombing cavities, and dynamic concrete expansion fissures across all governorates.
Forming protective high-build epoxy screeds for pharmaceutical warehouses, automotive factories, chemical staging hubs, and heavy logistics docks.
Grouting, anchoring, and stabilizing heavy machine beds, high-load industrial turbine plates, and heavy overhead crane rail pathways under continuous vibration for 2026 projects.
Bulk material contract specification tracking and tender allocation within public aviation complexes, maritime storage terminals, and major state infrastructure assets.
Substrate Profiling & Preparation: Concrete substrates must be sound, fully dry (minimum 28 days age profile), and mechanically texturized via diamond grinding or shot-blasting to eliminate surface laitance, followed by the application of an approved tacky epoxy primer.
Three-Part Technical Compounding: Thoroughly mix the liquid Components A and B together utilizing a slow-speed mechanical agitator first, then slowly disperse the dry Component C quartz sand pack into the blended fluid matrix, stirring continuously until a completely uniform lump-free mortar paste is built.
Execution Technique: Pour and level the heavy epoxy mortar paste over the freshly applied tacky primer coat ("wet-on-wet" method) via steel finishing trowels or screed bars, compacting the layer forcefully to expel air voids and ensure a perfectly uniform density.
Curing Staging: Allow the placed structural mortar bed to cross-link completely under controlled 2026 site parameters, strictly isolating the treated zone from mechanical traffic until full mechanical engineering design values are verified.
