Kemtekt

Ironclad Chemical & Acid Shield: Delivers total barrier protection against continuous corrosive exposure, industrial spillages, and heavy sanitizers.

Heavy Mechanical Traffic Durability: Safely withstands severe abrasion, rolling mechanical friction, and heavy equipment wheels in busy plants.

Impermeable Non-Porous Matrix: Fully prevents moisture, wastewater, and oil tracking into the concrete core, protecting rebar from premature oxidation.

Easy Sterilization & Maintenance: The non-absorbent smooth finish minimizes bacterial colonization and allows rapid high-pressure hot washing.

Persistent Structural Longevity: Retains original film thickness and mechanical core specifications over multi-year operational cycles.

Sealing and protective floor/wall coating inside chemical plants, food processing houses, pharmaceutical cleanrooms, and bulk warehouses.

Technical lining and chemical defense for structural concrete water tanks, sewage treatment plants, and industrial drainage channels.

Flooring protection for commercial automotive workshops, car parks, mechanical workshops, and petrol hubs prone to constant fuel stains.

Bulk material supply for nationwide public utility developments, national infrastructure tenders, and heavy-duty architectural civil works.

Substrate Profiling: Target surfaces must be completely dry (cured >28 days, moisture ratio <4%), structurally sound, and cleared of cement laitance, oils, or grease. Mechanical surface profiling via diamond grinding or grit-blasting is highly recommended to promote mechanical anchoring.

Execution & Installation: Install the Kemtekt system onto prepared surfaces utilizing a solvent-resistant roller, stiff brush, or professional airless spray machinery, adhering strictly to technical mixing ratios and specified wet film thicknesses.

Curing & Traffic Windows: Surfaces achieve light dry/foot traffic state within 24 hours. However, allow a steady curing interval of 5 to 7 days to reach full chemical cross-linking (Full Cure) before exposing the film to chemical or acid stress.

Site Restrictions: Do not execute if relative humidity parameters are extremely high or if negative back-pressure moisture tracking from underlying soils is present.