Marmox Thermoblock
Marmox Thermoblock
Marmox Thermoblock is a high-load-bearing, thermal insulation block designed to eliminate thermal bridging and rising damp.
Technical Property | Value / Description | Engineering Benefit |
Internal Composition | XPS + Polymer-concrete pillars | Structural load-bearing with total insulation |
Compressive Strength | 9 N/mm² | Safely supports multi-story wall loads |
Thermal Cond. ($\lambda$) | 0.047 W/m.K | Insulation efficiency 100x higher than brick |
Water Permeability | Zero (Non-capillary) | Total prevention of rising damp (capillary rise) |
Standard Length | 60 cm | Full compatibility with standard masonry units |
marmox thermoblock
Thermal Bridge Breaker: Stops heat leakage through the building's structural junctions, significantly reducing energy costs.
Rising Damp Prevention: Permanently solves the issue of moisture traveling up the walls, protecting paint and plaster.
Immense Load Capacity: Engineered to withstand heavy wall weights without any compression in the insulating material.
Seamless Integration: Can be laid with red brick, cement blocks, or AAC using traditional mortar.
The first course (starter row) for all external and internal building walls.
Under window sills and door thresholds to prevent condensation and mold.
Essential for Green Building and energy-efficient construction projects.
Thermal and moisture separation in cold rooms and warehouses.
Preparation: Lay over a level bed of rich cement mortar on top of the ground beam or concrete slab.
Installation: Blocks must be laid precisely using a spirit level to ensure perfect alignment.
Bonding: Vertical joints between blocks should be buttered with a strong adhesive (e.g., Kemapoxy) to prevent thermal gaps.
