Marmox One Slope Shower
Marmox One Slope Shower
Marmox One Slope Shower Underlay with Line Grid is a pre formed, engineered shower base crafted from high density Extruded Polystyrene (XPS) foam core.
Technical Property | Official Certified Value | Engineering Benefit |
Core Material Composition | High-density Extruded Polystyrene Foam (XPS) | Ultra-lightweight structure delivering total water impermeability and thermal efficiency |
Surface Reinforcing Layer | Polymer-modified cement skin with fiberglass mesh | Provides superior mechanical bonding directly for tile adhesives (C2 class) |
Drainage Slope Configuration | Factory pre-sloped single-direction gradient (One Slope) | Guarantees swift water flow toward the linear drain without ponding or complex site manual screeding |
Drain Type Integration | Linear Channel Drain (Line Grid Drainage System) | Enables sleek modern aesthetics and allows installation of large format tiles without diagonal envelope cuts |
One slope Shower underlay with line grid
Factory Pre-Engineered Gradient: Ensures consistent and mathematically precise water drainage toward the linear grid.
Integrated 100% Waterproof Structure: XPS closed-cell structure completely seals the shower floor against water penetration to lower levels.
Large Format Tile Compatible: Single slope plane permits direct tiling with large porcelain slabs without breaking tile patterns.
High Mechanical Load Capacity: Cementitious fiberglass coating absorbs compression and point load forces under heavy foot traffic.
Modern Barrier-Free & Walk-In Showers: Provides perfect level-access shower solutions for accessible and luxury bathrooms.
Hotels & Commercial Hospitality: Rapid installation base preventing water leaks and structural dampness issues in hotel suites.
Residential & High-End Villas: Elegant shower tray foundation supporting modern linear aesthetic drain covers.
Renovation & Refurbishment Projects: Lowers dead load on existing floors compared to thick concrete sloped screeds.
5. Application Guidelines
Substrate Preparation: Ensure the concrete or wooden subfloor is level, clean, structurally sound, and free of debris.
Base Installation: Spread flexible C2 tile adhesive onto the subfloor and press the Marmox One Slope tray firmly into place.
Linear Drain Connection: Connect the linear channel drain assembly directly to the waste plumbing system; perform a water leak test.
Joint Sealing & Tiling: Seal all board-to-wall and board-to-board joints using Marmox Waterproof Tape and membrane sealant before applying ceramic or porcelain tiles.
