Cellulose Varnish 45
Cellulose Varnish 45
Cellulose Varnish 45 is an advanced, highperformance, singlecomponent (1K) nitrocellulose based clear wood topcoat.
Technical Property | Value / Description | Engineering Benefit |
Classification | Single-Component (1K) Nitrocellulose Clear Semi-Gloss Wood Topcoat | Yields an elegant semi-gloss finish without hardener mixing complications |
Gloss Profile Rating | Balanced Semi-Gloss Profile (45% Gloss Rating) | Silk matte appearance that minimizes sharp light reflections and hides surface defects |
Drying Matrix | Fast Physical Air Drying via Solvent Volatilization | Enhances manufacturing efficiency and turnaround logistics for 2026 timelines |
Flow & Leveling Index | Superior Fluid Distribution and High Run Resistance | Achieves a completely smooth, uniform film surface free of matting patches |
Coating Interfacial Bond | Absolute Compatibility with Nitro Sealers & Opaque Doco | Builds a highly cohesive structural unit resisting subsequent cracking or peeling |
Verona-Nitro-Matt-Varnish-45
Elegant Semi-Gloss Appearance: Imparts a rich velvety clarity to wood assemblies, balancing the brightness of gloss coats with the softness of matte finishes.
Rapid Dust-Free Drying Phase: Dries to a non-tacky state within minutes, completely preventing atmospheric dust contamination during the critical 2026 curing window.
Tactile Anti-Fingerprint Shield: The semi-gloss profile (Grade 45) significantly reduces the visibility of fingerprint smudges and routine handling marks compared to high-gloss lacquers.
User-Friendly Remediation & Upkeep: Single-pack setup needing simple nitro-thinner dilution, streamlining spray gun operations and spot touch-ups.
Highly Economical Production Yield: Delivers excellent coverage rates per kilogram, minimizing coating operational expenses for mass-production furniture plants.
Final clear semi-gloss topcoat finishing of contemporary furniture lines, master bedroom sets, and custom dressing rooms across primary manufacturing sectors.
Finishing internal solid timber doors, architraves, window casings, and wood trims within residential complexes and administrative public buildings.
Fast-track maintenance painting, clear lacquer restoration, and touch-up refinishing of existing woodwork requiring a subtle matte look inside office spaces and hospitality suites.
Bulk material tender supply and contract specification tracking within corporate fit-outs, housing developments, and high-volume B2B coating supply chains.
Substrate Profiling: Verify that the preceding nitrocellulose wood sealer layer is completely dried and cured. Sand meticulously with fine abrasive papers and clear all debris using clean compressed air lines.
Dilution & Preparation: Agitate the CMB Cellulose Varnish 45 unit thoroughly to ensure homogeneous matting agent distribution. Dilute using high-grade nitro thinners to secure the accurate spray gun atomization viscosity.
Spraying Execution: Apply the thinned compound inside a clean operational area using standard spray setups with uniform air pressure. Execute 2 consecutive cross-coats with brief flash-off intervals to optimize sheen depth and film build.
Curing & Handling: Allow the lacquered woodwork to dry in a controlled dust-free zone. Ensure the pieces remain completely untouched until full physical hardness is achieved under 2026 standards before moving to packaging.
