Kema Graviato
Kema Graviato
Kema Graviato is an ultra durable, premium-grade polymer modified cementitious textured structural coating engineered for high performance finishing, protecting, and decorating external building facades and perimeter walls.
Technical Property | Value / Description | Engineering Benefit |
Classification | High-Performance Polymer-Modified Cementitious Textured Facade Coating | Heavy-duty architectural finishing and physical structural shield |
Chemical Base | White/Grey Portland Cement, Graded Mineral Fillers, and Pure Acrylic Resins | Creates an inseparable, solid bond with plaster blockwork planes |
Appearance / Texture | Coarse Grain Textured Finish (Available in various particle sizes/colors) | Masks underlying masonry undulations, creating structural uniformity |
Weathering Defense | Outstanding Protection against direct UV exposure, moisture, and heat | Completely stops material crumbling, multi-season fading, or washing |
Vapor Permeability | Highly Breathable Paint Film Matrix (Vapor Open Profile) | Allows dampness evacuation from interior walls, preventing blistering |
Kema-graviato
Exceptional Structural Toughness: Generates a thick, scratch-proof, and high-impact structural layer that endures tough weathering over extended 2026 service lifetimes.
Absolute UV Radiation Immunity: Loaded with organic inorganic pigments and stone aggregates that completely reject solar thermal fading, keeping tones stable.
Superb Plaster Defect Camouflage: Its distinct coarse particle composition easily covers surface irregularities, uneven lines, or rough trowel marks on base plasters.
Rain Ingress & Efflorescence Shield: Establishes a severe defense layer against wind-driven rainwater tracking, completely stopping white salt crystallization.
High Material Yield & Cost-Efficiency: Delivers massive aggregate coverage rates across extensive facade perimeters, serving as a highly economic B2B project selection.
Delivering premium-tier architectural textured finishes and structural profiles for exterior facades across residential compounds, villas, palaces, and public buildings.
Coating and upgrading boundary walls, bridge parapets, and public corridors prone to high pedestrian contact and mechanical friction.
Restoring, leveling, and face-lifting old weathered masonry layers to unify architectural presentation with weather-sealing properties.
Bulk material supply for nationwide municipal housing schemes, public infrastructure tenders, and heavy-duty architectural civil works.
Substrate Profiling: Target concrete frames or external cement plasters must be structurally sound, leveled, and meticulously cleared of fine dust, aggregate laitance, oils, or loose coatings. Lightly pre-dampen dry backgrounds prior to installation to balance suction (for powder variants).
Mixing Protocol: Gradually blend the Kema Graviato powder compound into clean, fresh water using a mechanical mixer until a totally smooth, cohesive paste is generated. (If using ready-mixed acrylic tubs, stir well before application).
Execution Pass: Lay the wet compound onto the prepared face using a flat structural steel trowel at a thickness matching aggregate grain sizing. Immediately scratch and texture the layout using a plastic finishing trowel (Rabon) in uniform linear or circular tracks to create the architectural profile.
Site Restrictions: Avoid application under high midday sun rays, heatwaves, or active dust sandstorms to prevent premature setting and preserve structural texture parameters.
