Ceroplast Super F

• Chemical Base: High-grade Acrylic Polymer-Modified Cement.

• Flexibility: Capability to bridge cracks up to 1 mm.

• Color: Light Industrial Grey.

• Certifications: Approved for 2026 national projects and compliant with the latest Egyptian and International Building Codes.

• Super Elasticity: Features high elongation properties that allow it to bridge hairline cracks and move with the structure without rupturing the membrane.

• Hydrostatic Pressure Resistance: Capable of withstanding extreme water pressure, making it ideal for deep reservoirs and Olympic-sized swimming pools.

• Vapor Permeability: Allows the concrete to "breathe" by letting water vapor escape while remaining completely impermeable to liquid water.

• Chloride & Salt Resistance: Provides an exceptional chemical barrier for reinforcement steel against corrosion, especially in coastal and marine environments.

• Superior Adhesion: Bonds powerfully to both damp and dry substrates, significantly reducing the risk of delamination or debonding.

Specialist STC Company supplies Ceroplast Super F for projects requiring elite technical specifications:

1. Swimming Pools & Fountains: The primary under-tile waterproofing layer that guarantees zero leakage regardless of hydraulic loads.

2. Large-Scale Potable Water Tanks: Lining for ground and elevated reservoirs with a completely safe, health-certified material.

3. Exposed Roofs & Balconies: Ideal for surfaces exposed to significant thermal expansion and contraction cycles.

4. Marine Structures & Canals: Waterproofing for canals, bridges, and concrete structures in constant contact with water bodies.

To ensure peak performance through Specialist STC Company supplies:

• Surface Preparation: Substrates must be clean and structurally sound. Corners must be reinforced with a "fillet" (angle fillet) using non-shrink repair mortar.

• Mixing Procedure: Pour the liquid component into a clean container, then gradually add the powder while mixing with a low-speed electric stirrer (300 rpm) for 3 minutes.

• Layer Application: Apply the first coat (1 kg/m²). It is highly recommended to embed a fiberglass mesh in corners and over cracks, followed by the second coat (1 kg/m²) after the first has dried.

• Curing: Allow to dry naturally. Protect the freshly applied membrane from rain or direct scorching sun during the initial curing phase.