Eco Foam
Eco Foam
Blue XPS Polystyrene is a premium, rigid thermal insulation board manufactured through a high precision extrusion process.
Property | Description / Value |
Material Base | Extruded Polystyrene (XPS) |
Density Range | 30 kg/m³ to 35 kg/m³ (Certified High Density) |
Thermal Conductivity | Ultra-Low (approx. 0.027 - 0.029 W/m·K) |
Water Absorption | Near Zero (Total closed-cell structure) |
Compressive Strength | Exceptional (Capable of bearing heavy traffic loads) |
Edge Profile | Available in Lapped (Shiplap) or Square edges |
Permanent Thermal Efficiency: Maintains its low thermal conductivity over the entire lifespan of the building, regardless of moisture exposure.
Total Moisture Resistance: Does not rot or decay; it is completely immune to rainwater, groundwater, and high humidity.
High Load Capacity: Its rigid structure prevents sagging or deformation under the weight of screed, tiles, or heavy machinery.
Precision Installation: Lightweight yet sturdy boards allow for easy cutting and a tight fit to eliminate "Thermal Bridges."
Eco-Friendly Choice: 100% recyclable, chemically inert, and CFC/HCFC-free.
Fire Safety: Available in self-extinguishing grades with fire-retardant additives.
Inverted Roof Systems: Placed above the waterproofing membrane to protect it from thermal shock and UV damage.
Cold Storage Facilities: Ideal for insulating floors and walls in food and pharmaceutical cold stores.
Cavity Walls: Provides a superior thermal envelope when installed within external wall cavities.
Basement & Foundation Insulation: Protects structures in direct contact with soil and fluctuating ground temperatures.
Industrial Floors: Used under concrete slabs in factories and warehouses that require temperature control and mechanical strength.
Substrate Preparation: Ensure the surface is level and free from sharp debris before laying the boards.
Layout: Boards should be placed tightly together. For lapped edges, ensure they are properly interlocked to create a continuous barrier.
Vertical Fixing: For walls, use compatible cold-applied bituminous adhesives or dedicated plastic insulation anchors.
System Protection: It is highly recommended to place a non-woven Geotextile layer over the foam in roofing systems before applying mortar or sand.
