Kema Clear

Crystal Clear Glaze Protection: Provides a highly rigid protective barrier without discoloring or altering the original masonry character.

Absolute Oil & Spill Shield: Completely blocks fluid tracking, oil staining, and grease ingress into porous concrete, ensuring rapid commercial cleaning.

Persistent UV & Weather Stabilization: Formulated to withstand extreme thermal expansion and atmospheric dampness over 2026 cycles without yellowing or flaking.

High Mechanical Scratch Defense: Safeguards treated floors against typical micro-scratches caused by daily industrial or commercial traffic.

Elite Industrial Top Coat: Performs as an outstanding seal-coat over stamped concrete pavements, acid stains, and colored epoxy layouts to maximize shine.

Sealing and protecting architectural stamped concrete, power-trowelled floors, and smooth concrete screeds in car parks, commercial hubs, and plazas.

Weatherproof clear sealing and stabilization for natural stones, clay bricks, and exterior structural stone facades against rain deterioration.

Transparent high-durability top-coating over colored industrial epoxy floorings to drastically minimize mechanical abrasion marks.

Bulk material supply for commercial facility renovations, tourist resort contracting developments, and nationwide infrastructure tenders.

Substrate Profiling: Target surfaces must be completely dry, structurally sound, and meticulously cleared of fine dust, aggregate laitance, oils, grease, or prior coatings. Repair all minor fractures before starting the application.

Execution & Mixing: Install the Kema Clear system utilizing a short-nap solvent-resistant roller, broad high-quality brush, or airless spray machinery. Ensure precise mixing ratios if dealing with a multi-component kit, distributing evenly to prevent thickness accumulation.

Curing Windows: Surfaces achieve dry state for light foot traffic within 24 hours. However, maintain a steady curing window of 5 to 7 days to reach full chemical cross-linking (Full Cure) before exposing the film to heavy washing or mechanical stress.

Site Restrictions: Do not execute if relative humidity parameters are extremely high or if negative back-pressure moisture tracking from underlying soils is present.