Kemapoxy 103
Kemapoxy 103
Kemapoxy 103 is an ultra high strength, solvent free, 3 component epoxy mortar engineered using special epoxy resins, structural hardeners, and graded dynamic quartz aggregates.
Technical Property | Official Certified Value | Engineering Benefit |
Classification | 3-Component High-Strength Epoxy Mortar | Superior compressive and tensile capabilities over normal concrete |
Adhesion Power | Exceeds the concrete's concrete tensile matrix | Guarantees absolute bond integrity preventing delamination under load |
Abrasion Resistance | Ultra-High Mechanical Durability Profile | Ideal for industrial floors with heavy forklift and aircraft tracking |
Chemical Immunity | Exceptional resistance to solvents, oils, and acids | Protects the concrete foundation against chemical erosion and leakage |
Shrinkage Profile | 100% Volume Stability (Zero Shrinkage) | Eliminates cracking risks in deep structural fills and joints |
kemapoxy 103
Extreme Compressive Performance: Yields mechanical load-bearing strengths vastly superior to standard concrete blends, handling dynamic stresses smoothly.
Rapid Cure & Low Downtime: Gains full mechanical properties swiftly, enabling rapid project handovers and minimizing industrial operational shutdown.
Total Fluid & Moisture Cut-off: Creates a fully non-porous cured structure that rejects water infiltration and corrosive chemical compounds.
Ergonomic Workability: Smooth blending properties allow precise leveling and hand-troweling on floors, joint systems, and structural plinths.
Long-Term Structural Durability: Highly resistant to thermal shifts, freezing, and moisture aging, ensuring lasting stability for 2026 engineering metrics.
Structural repair and deep leveling of factory floors, logistics warehouses, parking decks, and airport runways.
Packing and sealing expansion joints, construction joints, and floor cracks in bridge decks and tunnels.
Heavy-duty anchoring of starter bars, reinforcing rebar dowels, and industrial machinery holding bolts.
Base-plate bedding for structural crane rails, dynamic machinery plinths, and structural bridge bearings.
Repairing damaged structural nosings, beam edges, and spalled concrete columns across industrial Egypt.
Surface Preparation: The substrate must be clean, structurally sound, rough, dry, and entirely free of laitance, dust, curing compounds, oils, and grease.
Mixing Protocol: Premix Component A and Component B using a low-speed drill with a mixing paddle. Slowly introduce the Component C (graded quartz aggregate) while mixing continuously until a homogeneous, lump-free mortar is achieved.
Application Technique: Apply the blended epoxy mortar onto the prepared area using a steel trowel or float. Press firmly to ensure deep compaction and eliminate void formation, working strictly within the product's pot life window.
Safety & Storage: Always wear protective chemical gloves, safety eyewear, and clothing. Store in original, tightly closed packaging in a dry, shaded warehouse away from heat sources.
Kemapoxy 103 catalog
