Kemapoxy 103 T
Kemapoxy 103 T
Kemapoxy 103 T is a solvent free, thixotropic, 3 component structural epoxy mortar and coating engineered for vertical and overhead applications.
Technical Property | Official Certified Value | Engineering Benefit |
Classification | 3-Component Thixotropic Non-Sag Epoxy Mortar | Absolute structural retention on vertical surfaces and soffits |
Bonding Efficiency | Superior chemical cross-linking with substrates | Forms a monolithic union between old structural frames and new repairs |
Mechanical Resistance | High compressive, flexural, and impact tolerance | Absorbs severe dynamic loads, vibrations, and structural stress |
Chemical Shielding | Total barrier protection against moisture and salts | Inhibits chemical deterioration, concrete carbonation, and steel rust |
Shrinkage Control | 100% Volumetric Stability (Zero Shrinkage) | Eliminates internal micro-cracking in deep repair cavities and dowels |
kemapoxy 103 t
Advanced Non-Sag Gel Tech: Allows thick-layer manual or tool application onto vertical walls and ceilings without sagging or sliding.
Outstanding Compressive Power: Develops ultra-high early and ultimate mechanical properties, far exceeding conventional concrete specs.
Monolithic Repair Capabilities: Successfully rehabilitates structural honeycombs and voids, restoring full structural loading capacity.
Complete Impermeability: Functions as a watertight seal that blocks humidity, chloride penetration, and industrial airborne chemicals.
Optimized Curing Profile: Sets quickly and reliably under ambient warehouse conditions, facilitating rapid project handover in 2026.
Structural repair and re-profiling of concrete columns, bridge piers, beams, and ceiling slabs.
High-precision anchoring of structural rebar dowels, starter bars, and heavy anchor bolts in vertical or overhead orientations.
Patching voids, stone pockets, and irregular construction joints in commercial complexes and marine structures.
Heavy-duty protective coating for concrete and steel assets exposed to severe abrasion or chemical environments.
Crucial material sourcing for infrastructure tunnels, wastewater tanks, and structural building expansions in Egypt.
Surface Preparation: Substrates must be clean, structurally sound, dry, and thoroughly cleared of loose concrete particles, dust, oil, and laitance.
Mixing Protocol: Thoroughly blend Component A and Component B using a low-speed industrial mixer. Gradually add the dynamic filler Aggregate (Component C) while mixing until a uniform, paste-like thixotropic mortar is attained.
Application Technique: Apply the compound tightly onto the prepared area using a spatula, trowel, or packing knife. Press hard to maximize structural compaction and prevent voiding, completing all work within the product's active pot life.
Safety & Storage: Work in well-ventilated areas. Operators must wear protective eyewear, gloves, and clothing. Store in original, tightly sealed packaging in a cool, shaded warehouse away from heat sources.
