Kemapur 316 T

• Chemical Base: Aliphatic Polyurethane resin.

• Appearance: Clear liquid providing a "Glossy/Wet Look" finish.

• Consumption Rate: Approx. 0.2 to 0.3 kg/m² per coat (varies by surface porosity).

• Approvals: Certified as a high-end engineering solution for decorative insulation in administrative buildings and luxury villas for 2026.

• Crystal Clear Transparency: Leaves no colored residue, preserving the natural beauty of expensive materials like granite and marble.

• Ultimate UV Stability: Formulated with aliphatic resins that do not yellow or degrade under direct sunlight in 2026's extreme climatic conditions.

• Mechanical & Chemical Durability: Highly resistant to foot traffic, impact, abrasion, and common household cleaning chemicals.

• Seamless Waterproofing: Creates a continuous, non-porous film that seals tile joints and stone capillaries effectively.

• Permanent Elasticity: Bridges hairline cracks and adapts to thermal expansion and contraction without peeling or cracking.

Specialist STC Company supplies this product to solve complex architectural challenges:

1. Balcony & Terrace Waterproofing: Sealing existing ceramic or tiled floors without the need for demolition and re-installation.

2. Natural Stone Protection: Shielding stone and marble façades from moisture, efflorescence (salt staining), and pollutants.

3. Glass & Metal Structures: Sealing joints in skylights, glass domes, and architectural metal frames.

4. Stamped Concrete Sealing: Applied as a protective topcoat to prevent color fading while providing absolute waterproofing.

To ensure maximum transparency and performance through Specialist STC Company supplies:

• Deep Cleaning: The surface must be thoroughly washed to remove oils, grease, and dust. The substrate must be completely dry (trapped moisture can cause cloudiness).

• Joint Preparation: Inspect grout lines and repair any damaged joints before application.

• Application Technique: Apply in two coats using a roller, brush, or airless spray.

• Curing Interval: Allow the first coat to dry (approx. 6–12 hours) before applying the second to ensure a robust, uniform membrane.