Kemflex 140

• Chemical Base: Polymer-modified (Rubberized) Bitumen Emulsion.

• Density: Approximately 1.05 g/cm³.

• Elongation: High elongation properties to withstand structural settling.

• Approvals: Complies with Egyptian Standard Specifications and is approved for major 2026 national projects and consultancy firms.

• Superior Elasticity: Due to its rubberized (polymer-modified) nature, it accommodates minor thermal expansions and structural movements without cracking.

• Excellent Adhesion: Bonds strongly to most construction surfaces, including concrete, mortar, and masonry, whether dry or slightly damp.

• Chemical & Salt Resistance: Provides an effective barrier for buried concrete against aggressive soil sulfates and groundwater chemicals.

• Eco-Friendly & Safe: A water-based, non-toxic formula that is safe for applicators and suitable for use in confined spaces.

• Cost-Efficient Execution: Easy to apply manually or by spray, reducing labor time and overall project costs.

• Foundations & Footings: Protecting pile caps, neck columns, and ground beams from rising dampness.

• Retaining Walls: Waterproofing concrete walls in contact with soil to prevent water ingress.

• Wet Areas: A reliable primary waterproofing layer for bathrooms, kitchens, and balconies under tiling.

• Roofing Systems: Sealing concrete roofs before the installation of protective layers or tiles.

To ensure maximum durability through Specialist STC Company supplies:

1. Surface Preparation: Substrates must be sound, clean, and free from oil, grease, and loose particles.

2. Priming Coat: It is recommended to apply a primer coat by diluting Kemflex 140 with 20-30% clean water to seal concrete pores.

3. Application: Apply at least two coats at right angles to each other using a brush, roller, or airless spray for total coverage.

4. Curing Time: Allow the first coat to dry completely before applying the second layer.