Kemapor 312 F
Kemapor 312 F
Kemapor 312 F is a premium grade water and thermal insulation coating based on high performance Elastic Acrylic resins reinforced with synthetic fibers.
Chemical Base: Fiber-reinforced acrylic elastic emulsion.
Density: Approx. 1.3 g/cm³.
Consumption Rate: Approx. 1 - 1.5 kg/m² (for two coats depending on surface porosity).
Approvals: Complies with Egyptian Standard Specifications and is recommended for major residential and administrative projects in 2026.
kemapur-312-f
Dual Action Protection: Acts as a powerful waterproof barrier and a thermal insulator (heat reflection), significantly reducing energy consumption.
Fiber Reinforcement: The built-in fibers create an internal reinforcement matrix that prevents the insulation membrane from tearing under stress.
Permanent Elasticity: Features high elongation properties, allowing it to adapt to thermal expansion and structural movements.
UV Resistance: Specifically designed for direct exposure to sunlight without degradation or discoloration over time.
User-Friendly: A single-component, cold-applied product that requires no heating or complex mixing equipment.
Specialist STC Company supplies this product to cover a wide range of 2026 project requirements:
Exposed Roof Insulation: Ideal for concrete, cementitious, and metal roofs directly exposed to sun and rain.
Renovation of Existing Insulation: Highly efficient for restoring old bituminous or acrylic insulation layers.
Façades & External Walls: Protecting vertical surfaces against heavy rain and extreme weather conditions.
Top Coat for PU Foam: Applied as a final protective layer over Polyurethane foam systems to prevent UV degradation.
To ensure maximum performance through Specialist STC Company supplies:
Surface Preparation: The substrate must be clean, sound, free from oils and dust, and any honeycombing must be repaired.
Priming: A primer coat is recommended by diluting Kemapor 312 F with 20% clean water to seal the pores.
Main Application: Apply at least two coats in perpendicular directions, ensuring the first coat is completely dry before applying the second.
Corner Reinforcement: For corners and expansion joints, it is recommended to embed a fiberglass mesh between the two coats for extra strength.
