Traffic Paint CR

Unrivaled Mechanical Scrape Defiance: Effortlessly absorbs high shear stresses and physical friction generated by speeding aircraft and heavy logistics cargo.

Complete Fuel & Chemical Immunity: Perfectly shields the underlying layer from damage due to aviation fuel, kerosene, oils, and chemical spills.

Severe Substrate Anchoring Integrity: Forms an aggressive mechanical bond over both asphalt and concrete substrates, neutralizing moisture-induced peeling.

Rapid Traffic-Ready Curing Profile: Sets to a hard film within minimized timeframes, allowing airfield operations to resume quickly without marking displacement.

Superior Environmental Protection: Chlorinated rubber compounds protect the line graphics from chalking, high humidity, salt mist, and severe solar UV rays.

Delineating lane lines, touchdown markings, and taxiway guides on runway fields (Runways & Taxiways) at commercial and military airfields for 2026 specs.

Striping international expressways, heavy toll barrier plazas, industrial sea ports, and manufacturing zones with dense heavy-vehicle counts.

Layout marking inside high-spill commercial fueling stations, aviation maintenance hangars, and massive logistics distribution hubs.

Material specification mapping and bulk supply contracting within civil aviation authorities, national transport agencies, and industrial BOQ listings.

Substrate Profiling: Target asphalt or concrete planes must be structurally sound, dry, and entirely cleared of dust, loose aggregates, grease, oil, or failing old coatings. Mechanical shot-blasting or high-pressure air blasting is technically recommended for optimal anchoring.

Mixing & Fluid Management: Thoroughly homogenize the Traffic Paint CR compound using a mechanical low-speed drill mixer to blend the heavy rubber resins. Thin exclusively using the designated solvent (CR Thinner by CMB) at a ratio of 5% to 10% maximum by volume, adjusting for airless spray parameters.

Execution Protocols: Deploy the product using professional self-propelled road-marking spray machinery or high-pressure airless spray guns. To enhance night retroreflectivity, drop-on glass beads must be embedded instantly onto the wet paint film layer.