Paint Remover
Paint Remover
Paint Remover is a heavy duty, gel based chemical formulation engineered to aggressively penetrate, dissolve, and lift aged or damaged coatings from various substrates.
Technical Property | Official Certified Value | Engineering Benefit |
Classification | Heavy-Duty Gel Paint Stripper (Paint Remover) | Maximum retention on vertical panels without running or wastage |
Penetration Depth | Advanced Multi-Layer Polymer Disruption | Softens and blisters tough epoxy, PU, and old NC coatings |
Substrate Compatibility | Safe on ferrous/non-ferrous metals and hardwood | Strips coatings cleanly without pitting or corroding raw metals |
Evaporation Rate | Ultra-Slow Vapor Release Gel | Allows extended contact time for highly built paint systems |
Post-Application Cleaning | Washable with water or industrial solvents | Leaves the surface residue-free and fully prepared for priming |
Eliminates Harsh Sanding: Replaces aggressive mechanical grinding and heat-burning, preventing structural deformation of sensitive substrates.
Non-Drip Gel Technology: Holds firmly onto vertical pillars and curved panels, optimizing chemical reaction efficiency per square meter.
Ultra-Fast Blistering Action: Initiates paint wrinkling, lifting, and softening within minutes of application.
Broad-Spectrum Paint Removal: Universally removes automotive lacquers, synthetic enamels, varnishes, epoxy floor coatings, and polyurethane sealers.
Ready-to-Use (RTU): Requires no thinning or pre-mixing, offering instant performance and minimizing errors on-site in 2026.
Stripping old automotive finishes and undercoats in professional bodyshops and restoration facilities.
Removing varnish and synthetic alkyd paints from historical wooden doors, window frames, and furniture.
Decoating industrial machinery, steel tanks, and metal structures prior to recoating with protective primers.
Lifting failure-prone epoxy or polyurethane coatings from concrete workshop floors and metal platforms.
Critical chemical supply for civil contractors, automotive refurbishing plants, and marine maintenance yards.
Application Technique: Apply a thick, even layer of Paint Remover using a paint brush. Brush in one direction only to maintain the gel’s cohesive thickness.
Reaction Window: Allow the gel to rest on the surface for 5 to 15 minutes (depending on paint type and thickness) until the coating fully blisters and lifts.
Scraping & Cleaning: Gently scrape off the softened paint with a putty knife or metal scraper. Thoroughly wash the stripped surface with water or solvent to remove all chemical residues before repainting.
Safety Protocols: Use only in open, well-ventilated spaces. Operators must wear heavy-duty chemical-resistant gloves, safety goggles, and organic vapor respirator masks.
Paint Remover
