Cerotekt 1

• Chemical Base: Active Crystalline Technology-enhanced cement.

• Color: Industrial Grey.

• Consumption Rate: Approximately 1.5 to 2.0 kg per square meter (for a two-coat system).

• Certifications: Approved by consultants for 2026 national infrastructure projects and compliant with global building codes.

• Deep Penetration Technology: Unlike surface coatings, it penetrates deep into the concrete matrix, becoming an integral part of the structure.

• High Hydrostatic Pressure Resistance: Exceptionally effective against both positive and negative water pressure, making it ideal for deep foundations and basements.

• Self-Healing Properties: The active crystals remain dormant until reactivated by moisture, allowing them to seal future hairline cracks automatically.

• Reinforcement Protection: Prevents the ingress of water, salts, and chlorides, shielding the structural steel from rust and carbonation.

• Health & Eco-Certified: Fully approved for use in potable water tanks and food processing facilities.

Specialist STC Company supplies Cerotekt 1 for large-scale engineering projects across Egypt:

1. Concrete Water Reservoirs: Primary internal waterproofing for ground and elevated potable water and fire-fighting tanks.

2. Sewage & Desalination Plants: Protecting concrete infrastructure from the aggressive effects of treated water and chemicals.

3. Basements, Tunnels, & Lift Pits: Preventing groundwater seepage into underground levels from the inside (negative side) or outside.

4. Swimming Pools & Fountains: Providing a totally impermeable barrier that prevents structural water loss.

To ensure successful crystalline activation through Specialist STC Company supplies:

• Surface Preparation: The substrate must be clean, open-pored (high-pressure water jetting is preferred), and pre-soaked to a Saturated Surface Dry (SSD) condition.

• Mixing: Mix the powder with clean water at the specified ratio (typically 3 parts powder to 1 part water) until a homogeneous, lump-free consistency is achieved.

• Application: Apply in two coats using a stiff brush or mechanical spray. Apply the second coat while the first is still "green" (firm but not fully dry).

• Curing Protocol: Cerotekt 1 requires wet curing. Mist-spray the treated surface with water 2–3 times daily for 2–3 days to ensure deep crystal growth.